My Rubber Plant Is Drooping

My rubber plant is drooping

Take your Rubber Plant out of its pot to check if the potting mix is waterlogged. Inspect the root system and trim away any rotten or damaged roots. If the potting mix is soggy, replace it with fresh high-quality mix so that your plant can start to recover.

Can you save a drooping rubber plant?

Once you've determined the rubber tree plant is getting too much water, it's time to revive the plant. Immediately stop watering the plant and allow the soil to dry. Do not water the plant again until the soil is dry to a depth of 1 inch. If you suspect root rot has set in, remove the plant from the pot and its soil.

What does an overwatered rubber plant look like?

If the older leaves (usually the largest ones, at the bottom) are becoming yellow or brown, that's a sign of overwatering. Let it dry out fully during longer periods of time between waterings. If the yellow/brown spots are spreading from the inner part of the leaf and out, that's again a sign of overwatering.

Why is my rubber plant drooping and losing leaves?

Over watering can cause droopy leaves in a short time prolonged over watering can kill the plant.

How do you get a rubber plant to stand up?

Rubber Plants are not self supporting, the longer they grow the droopier they get. You can keep your rubber plant standing upright by using bamboo or dowels. I just use the leaves to hold it in place. Rubber Plants are quick growers, growing as much as 24″ in a season!

Do rubber plants need direct sunlight?

Bright, indirect light is ideal for growing the Rubber Plant, however they are unusually tolerant of lower light spaces for a ficus. To keep the plant happiest though, it is commonly recommended to place it by a southern facing window with sheer curtains for the brighter light to filter through.

How often should rubber plants be watered?

How often should you water a Rubber Tree? It is best to water your Rubber Tree every 1-2 weeks, allowing the soil to dry out between waterings. Opt for the more frequent end of the range when the plant is receiving more light, such as in spring or summer, and in the fall or winter, reduce the frequency.

How do I know if my rubber plant is dying?

Overwatering can be harmful to a Rubber Plant Root rot is one of the biggest killers of houseplants and must be treated immediately. If the bottom leaves of your rubber plant are turning yellow or brown, this is a sign that you are overwatering. Check the soil moisture and adjust watering accordingly.

How long can a rubber plant go without water?

Rubber Plant Watering it once every 15 days is the key to optimum growth. During fall and winter, you can reduce it down to once a month.

Should rubber plants be misted?

Since rubber trees are tropical, they thrive in warmer, more humid climates and don't handle cold, dry environments so well. They're best kept between 60 and 78 degrees Fahrenheit, and you'll want to avoid any major cold drafts or quick temperature drops. They also require regular misting to keep their humidity up.

Can I water my rubber plant with tap water?

Prior to watering, allow tap water to sit for a few hours to allow chlorine to evaporate and the water to come to room temperature. This causes less shock to the plant than icy water. When watering a rubber plant, drench the soil completely until excess moisture runs out the drainage holes.

How do I know if my rubber plant needs water?

Watering and Fertilizing Your Rubber Plant Watch for droopy leaves, which indicate a need for more water. Leaves that turn yellow and brown and drop signal over-watering. Mist during any season if they air is too dry, especially heated dry air like that which might occur during winter indoors.

Will rubber plant leaves grow back?

It is highly unlikely that a Rubber Tree will produce new leaf growth along older stems once it drops its original leaves. Instead, you can rely on techniques like ensuring proper plant care is being practiced and pruning to stop additional leaf drop and encourage new branches to grow.

Where should rubber plants be placed at home?

Place your rubber tree in a south-facing, light-flooded window. It just loves loads of bright indirect light every day. In low-light conditions, this indoor plant will become leggy in search of sunlight.

Do rubber plants like tight pots?

Rubber plants enjoy being a little pot-bound, which means that they like to have their roots crowded within their container. However, keeping them in the same pot too long will stunt their growth. Moving them to a larger pot will allow them to grow bigger.

What kind of pots do rubber plants like?

When choosing a pot, pick one with drainage holes, which will help prevent root rot if you overwater the plant. Beyond this, rubber tree plants aren't picky about their soil—they do well in nearly any type of general potting mix.

When should I repot my rubber plant?

When to Repot a Rubber Plant. Every two to three years repot in spring when the plant is actively growing. The soil will have lost its nutrients and will need to be replaced with fresh well-draining potting soil. Pumice or perlite can be added to help aerate the soil and improve drainage.

How often do you feed a rubber plant?

Caring for rubber plant Water only when the top two inches of compost have dried out and don't let your rubber plant sit in water. Feed monthly with a liquid feed in spring and summer.

How long do indoor rubber plants live?

“With the right care, a rubber tree houseplant can live for 10 years or more,” says Lisa Eldred Steinkopf, author of Houseplants: The Complete Guide to Choosing, Growing, and Caring for Indoor Plants.

Are rubber plants hard to keep alive?

Rubber plants are easy to care for and can grow quickly under the right conditions. They're sturdy, tolerant and simple to please. Keep their soil slightly moist, make sure they get plenty of sunshine, and if you're at a comfortable temperature, they'll be comfortable too.